Keep your kit safe, comfortable and performing its best — so every ride is one you can trust.
Motorbike gear is an investment. Regular care extends its life, maintains protection and keeps it looking sharp. Use the straightforward checks and cleaning steps below to care for helmets, jackets, gloves, boots and accessories.
Quick daily checks
- Look for visible damage to shells, seams, zips and stitching.
- Check helmet visor for scratches and clean it before each ride.
- Ensure fastenings, buckles and straps work smoothly.
Helmet care
- Wipe the outer shell with a soft cloth and mild soap. Avoid strong solvents or alcohol-based cleaners.
- Clean the visor with a microfibre cloth and a gentle, non-abrasive cleaner. Rinse residue with water and dry with a soft cloth.
- Remove and wash liners or cheek pads only if your helmet’s label says they’re removable. When removable, hand-wash or use a gentle cycle and air-dry away from direct heat.
- Store helmets on a shelf or hook away from sunlight and heat sources. Replace a helmet after a significant impact or when padding no longer fits snugly.
Jacket and trouser care (textile & leather)
- Always check the care label. If a garment has a waterproof membrane, follow the manufacturer’s washing instructions to protect that layer.
- For textile gear: brush off loose dirt, spot-clean with mild soap and water, and allow to fully dry before storage. If machine washing is permitted, use a gentle cycle and a mild detergent.
- For leather gear: remove surface dirt with a soft brush or damp cloth. Use a leather cleaner and conditioner recommended for motorcycle garments to keep the leather supple and prevent cracking.
- Re-proof textile outer layers with a suitable waterproof treatment only after cleaning and full drying, and follow product instructions.
Gloves
- Wipe or hand-wash gloves following the care label. Avoid soaking leather gloves; clean and condition instead.
- Let gloves air-dry naturally. Do not use direct heat or tumble dryers.
Boots
- Remove mud and grit after rides. Clean with a soft brush and mild soap.
- Condition leather boots with a suitable product. For textile or waterproof boots, ensure seams and membranes stay intact and reapply a water repellent if needed.
Visors, goggles and lenses
- Rinse off dirt and insects with water first. Use a microfibre towel and a lens-friendly cleaner to remove smears.
- Avoid paper towels or rough cloths that can scratch anti-fog or anti-scratch coatings.
Storage and long-term care
- Keep gear dry, cool and out of direct sunlight. Use breathable bags or hang garments to preserve shape and ventilation.
- Open vents and pockets before storage to prevent trapped moisture and odours.
- Inspect protective armour and replace or service any pieces that are damaged or no longer fit correctly.
Repairs and when to replace
- Small tears and worn zips can often be repaired — use a qualified repair service familiar with motorcycle gear.
- Replace helmets after a crash, after significant ageing, or when comfort and fit are compromised. Replace other protection when structural damage or excessive wear is present.
Final tips
- Keep a simple care kit at home: soft cloths, mild detergent, leather conditioner, a microfibre towel and a brush.
- When in doubt, follow the manufacturer’s label or contact us for product-specific guidance.
